NUEVOS PRODUCTOS PARA EL AÑO 2008 :  EQUIPAMIENTO PARA ANATOMIA PATOLOGICA : MESAS TALLADO, BAÑOS HISTOLOGICOS, Y FUNGIBLE

EN BREVE DISPONDREMOS DE UNA PAGINA CON TODAS LAS NOVEDADES –

 

 

NUEVOS PRODUCTOS EN HANNA INSTRUMETS : PH METROS DE NUEVA GENERACION

                                                                                            FOTOMETROS  CON CAL CHECK

                                                                                             MEDIDORES DE TURBIDEZ Y CLORO – Según normas EPA 

 

NUEVA REPRESENTADA  : LABPROCESS :  MEDIDORES DE TEMPERATURA, DATALOGGER, TITRADORES, ETC

 

 

 

 

 

 

AGITADORES ORBITALES DE VAIVEN

AGITADORES MAGNETICOS

AGITADORES MULTIPUESTO

BAÑOS DE AGUA Y ARENA

BAÑOS CON AGITACION

BAÑOS SECOS

   

 

 

  CABINAS DE SEGURIDAD BIOLOGICA, FLUJO LAMINAR ETC

 

   ESTUFAS MMM

 

 

 

NUEVOS PRODUCTOS EN DISTRIBUCIÓN PARA CASTILLA Y LEON

 

Marcas :          TECHNE

                         NEW BRUNSWICK

                         REAL

                        TECHNE CO2

                        AXON

                        BIO-ROBOTICS

 

 

En colaboración con el importador para España , hemos llegado a un acuerdo para representar a esta empresa en Castilla y León, pudiendo ofrecer sus equipos con total garantía y servicio técnico en todas las marcas.

En los congeladores CINCO AÑOS EN COMPRESORES Y UN AÑO EN REPUESTOS     

 

 

 

TERMOCICLADORES  CON Y SIN GRADIENTE. –                                               TECHNE

INCUBADORES DE CO2.-                                                                                 NEW BRUNSWICK

ULTRACONGELADORES NEW BRUNSWICK .-                                        NEW BRUNSWICK

CABINAS DE FLUJO LAMINAR Y SEGURIDAD BIOLÓGICA  -                         REAL

SISTEMA DE ELECTROFORESIS MINI-JAC-I Y FUENTE ALIMENTACION

ONCOR – QBIOGENE  - SONDAS

 

 

 

Enlace con Techne

 

Enlace con productos REAL

 

Enlace con Oncor-QBiogene

 

Enlace con www.nbsc.com

Enlace con Axon

Enlace con BioRobotics

 

 

Touchgene Gradient Thermal Cycler

 

 

 

Con gradiente y sin gradiente

 

 

 

 

 

 

 

 

 

 

 

 

Pantalla Táctil

SPECIFICATION

BLOCK TEMPERATURE

Gradient  range

20ºC to 70ºC

Maximum gradient

30ºC

Minimum gradient

1ºC

Number of temperature probes

4

Block temperature range

4ºC to 99ºC

Max. ramp rate*

3.0ºC/sec

Block uniformity without a gradient*

<±0.4ºC

Column uniformity with a 10ºC gradient*

<±0.3ºC

Temperature accuracy* 

<±0.3ºC

Gradient accuracy*

<±0.3ºC

Temperature set point adjustment

0.1ºC

Heated Lid

 

Selectable heated lid temperature 

100ºC - 115ºC

Heated lid enable/disable

Yes

Warm up time ambient (to 105ºC)

4 min

Over temperature cut out

Yes

Regulated lid pressure

Yes

Heated lid only comes on if block is set above 30º

 

Programming

 

Password protection

Yes

Incremental / decremental temperature

Yes

Incremental / decremental temperature segment hold time

Yes

Variable programmable ramp rate steps

±0.1ºC/sec

Programmable ramp rate resolution

0.1ºC

Gradient calculator

Yes

Maximun programs internal memory

50#

Maximun programs memory card

500#

Program name capability

Alphanumeric

Programming interface (115x90 mm screen)

Touch Sensitive

Pause facility

Yes

End of program alarm (can be disabled)

Yes

Auto restart on power failure

Yes

Run end time calculation

Yes

Miscellaneous

 

Dimensions L x W x H (mm)

420 x 220 x 260

Net weight

11.5kg

Serial port RS 232 / RS 485

Yes

Connection to PC control program 

Yes

Free software upgrades from website

Yes

Power consumption

620 Watts

Ambient temprature range

5ºC to 40ºC

Relative humidity tolerance

up to 95%

Frequency

50 - 60 Hz

Voltage

100v or 120v/230v 

*specifications given are typical values in ambient temperature of 20 ºC for non-gradient (unless stated).
#Actual numbers dependent on complexity of the program

 

 

TechgenePC Thermal Cyclers

 

 

 

BLOCK TEMPERATURE:

Block temperature range

4ºC to 99ºC

Heating ramp rate*

3.6ºC/Sec.

Cooling ramp rate 0.2 ml block*

2.0ºC/Sec.

Cooling ramp rate 0.5 ml block*

1.8ºC/Sec.

Uniformity at 50 ºC*

0.2ºC

Uniformity at 72 ºC*

0.4ºC

Uniformity at 95 C*

1.0ºC

Accuracy at 50 ºC*

± 0.2ºC

Accuracy at 72 ºC*

± 0.4ºC

Accuracy at 95 ºC*

± 0.3ºC

Temperature set point adjustment

0.1ºC

End of program cooling below ambient

YES

* All specifications given are typical values under ambient temperature of 20ºC. More details are available upon request 

 

CONSUMIBLES PARA PCR – PLASTICOS

 

Suitable for 0.2ml thermal cycler blocks

Individual 0.2ml Thermo-Tubes

8-tube strip

Thermo-Strip                                   

 

Suitable for 0.5ml thermal cycler blocks

Individual 0.5ml Thermo-Tubes

8-cap strip

Ultra Clear Cap Strips

 

Racks de puntas – Puntas especiales para geles – Punas con filtro- Placas de 96 ó 384

Biomek Tips

Maxi Sequencing Tips

PCR Filter Tips

Thermo-Mat 96

 

 

 

 

 

 

 

 

 

 

 

NEW BRUNSWICK SCIENTIFIC CO., INC.

Ultra-Low Temperature Freezers
Offer Up to 30% More Storage

 

 

Premium Freezer Upright Model Specifications

 

 

 

U410

U570

U101

External Dimensions +
HxWxD (inches)
HxWxD (centimeters)

76.0" x 31.5" x 33.7"
193 x 80 x 85.5

76.4" x 40.4" x 33.7"
194 x 102.5 x 85.5

31.5" x 35.4" x 20.9"
83 x 90 x 53

Internal Dimensions +
HxWxD (inches)
HxWxD (centimeters)

49.8" x 21.7" x 23.1"
126.5 x 55 x 58.8

49.8" x 30.1" x 23.1"
126.5 x 76.5 x 58.8

25.2" x 18.9" x 13.0"
64 x 48 x 33

Weight
(pounds / kilograms)

518 lbs  /  235 kg

584 lbs  /  265 kg

256 lbs  /  116 kg

Capacity
(cubic feet / liters)

14.5 ft3  /  410 L

20.0 ft3  /  570 L

3.6 ft3  /  101 L

Temperature

-20ºC to -86ºC at ambient temperature of +32ºC

 

 

 

 

+ To allow for hinges and handles, add 3.5 inches to depth of chest freezer.

 

 

 

 

 

 

 

 

Model CO28IR CO2 Incubator

 

 

ADVANCED FEATURES
  • Cylinder changeover valve automatically switches from empty to a full CO2 cylinder. No costly extras needed.
  • Extra-large chamber (188 Liters/6.64 cubic feet) is equipped with six removable, adjustable-height, stainless-steel shelves for ample culturing capacity.
  • Infrared control sensor, more precise than traditional thermal sensors, detects changes in CO2 within ± 0.1%
  • Microprocessor controller provides precise temperature and CO2 control, regardless of how frequently the door is opened or how the chamber is loaded
  • Triple wall, 21 gallon water jacket* provides superior temperature uniformity. Eliminates cold spots preventing condensation - a primary source of contamination. Stabilizes chamber temperature even during power outages.
  • Temperature-controlled exterior door eliminates condensation on inner door.
  • Tempered-glass, interior door permits viewing samples without compromising culture conditions
  • Six adjustable-height shelves provided.
  • Exterior CO2 sampling port eliminates disturbing samples.
  • Generously-sized humidity pan provides quick humidity recovery.
  • 25 mm, through-wall access provided for ancillary-equipment power cords.
  • Quickly-removed shelf frames and gasket seal facililate disinfection.
  • Autoclavable door gasket seals chamber, and absorbs physical shock to cultures during door closure
  • Humidification achieved through natural evaporation, with RH digitally displayed to within ± 1.0%
  • 25 mm access port accommodates through-wall operation of electrical equipment within the chamber
  • Stainless-steel incubator chamber with radius interior makes clean up of spill fast and easy

 

 

Enlace con Oncor-QBiogeneEnlace con Oncor-QBiogene

 

Sondas directas e indirectas para DNA satélite, centrómeros y telómeros humanos, microdeleciones, de secuencia única para oncología/patología y translocaciones, de aneuploidía pre y postnatal. FISH. X-Fragile. Telomerasa. CpG. Análisis de metilación. Sondas específicas humanas

 

 

 

 

 

 

 

 

 

 

Sistema de electroforesis MiniJAC-I

 

cubeta.tif (669416 bytes)

Cubeta MiniJAC-I

REF:   RCMINIPH
CAPACIDAD:   350 ml
VOLTAJE LÍMITE:   150 VDC
POTENCIA LÍMITE:   40 W

MEDIDAS:   24 x 7 x 13 cm

DISEÑO: Tapa ideada para la prevención de la condensación y mejora de la visibilidad. Fácil apertura. Posición única de la tapa y el soporte de geles.

SEGURIDAD: Desconexión de la corriente en los electrodos por apertura de la tapa.

RESISTENTE: Construida con poliuretano de alta densidad.

ELECTRODOS: Fácilmente intercambiables. Electrodos de platino con conector de latón bañado en oro.

SOPORTE DE GELES: de 10 x 10 cm con posibilidad para dos peines y con líneas para facilitar la carga de la muestra.

PEINES: Incluye peines de 9 y 15 pocillos de 1,5 mm.

 

VOLTAJE DE SALIDA:   50 y 100 VDC